1 / 2
Overview
- Make
- AUTOMATIC FEED
- Type
- Coil Feed Lines
- Condition
- Used
- Stock #
- 501266
Specifications
- Max Coil Width Capacity
- 76 inches
Spec Sheet
Coil Line Specifications:
Coil Weight: 35 MT
Coil O.D.: 750-2000 mm
Coil O.D.: 750-2000 mm
Coil I.D.: 610 mm-630 mm
Feed Length: 0-458 mm
Feed Angle: Variable, 90-300 degrees, die dependent
Strokes Per Minute: Variable, 10-40 SPM
Pass Line Height: 1350 mm, optional 102 mm adjustment
Control System -
Drive System: Unico
PLC: Allen Bradley
Operator Interface: IBM, Wonderware
Line Speed: 98 fpm (30 mpm)
Line direction: left to right
Front of Line Consists of:
- Manufacturer: AFCO
- Coil Shuttle: 35 MT x 2000 mm wide
-
Uncoiler: 35 MT x 2000 mm wide
- Double Stub Mandrel
- Peeler
- Entry Pinch Roll
- Crop Shear #1
- HSS 50 MM LEVELER
- 13 Roll Leveler
- 6 High Backups
- Loop Thread Table
- Roll Feed
- Crop Shear #2
- Scrap Chopper
- Die Thread Table
- Exit Pull Rolls
- Hydraulic System
- Line Time
End of Line Consists of:
Mild & High Strength Steel Either with Mill Oil, Pre-lube, Electroplated, or Hot Dipped Zinc Coatings.
- Thickness of Material: 0.5 mm - 3.0 mm
- Progression: Max. 610 mm
- Draw: Max. 90 mm
- Panel Depth: 125 mm
- SPM: 10-40
- Conveyor Speed (Bolster, Exit Conveyor): 12 m/min. - 61 m/min
- Coneyor Speed (Distribution Conveyor): 6 m/min-30.5 m/min.
- Stacking Conveyor Height: 458 mm-839 mm
- Turntable (Top) Length: 2,895 mm
- Turntable (Top) Deep: 2,108 mm
- Turntable Height: 355-712 mm
- Turntable Tilt: Max. 35 degrees
- Controls- Electrical Component AB PLC 5/80 with ControlNet; AB 1305 Force Field Drives
Similar Equipment
#502040
SESCO
54” wide x 60,000 Lbs x .625" thickness Sesco Coil Feedline
- Coil Feed Lines
- 60,000 Lbs x 54” wide x .625" thickness
#502037
#502035
US MACHINE
30,000 LB X 42" X .312" U.S. MACHINE COIL FEED LINE
- Coil Feed Lines
- M24 30,000 LB X 42" X .312"